The swept plough SR-T is intended for removing the fresh fallen snow or snowdrifts. The front mounted hanging on 3-point hitch or on clamping plate assure excellent exploitation of all tractor and plough skills. The best application will be in snow removing in cities, on crossroads and on surfaces where the combination of swept and side snow plough is necessary.
The plough has a robust experienced design with minimum needs for maintenance. Its change settings doesn’t have excessive working and time demands. It is a quality and fast help for hard work. The swept plough SR-T for tractor is equipped by hitch class 2.
The angle modification is provided using two hydraulic cylinders, controlled by two hydraulic circuits. It is possible to control each wing separately. Blade from hardox is in basic equipment.
| Finish | FRONT SWEPT | FRONT SWEPT |
|---|---|---|
| Type | SR-T | SR-T |
| Commercial labelling | SR T 2500 | SR T 3000 |
| A Plough width (mm) | 2500 | 3000 |
| A1 Plough width (mm) | 3525 | 4245 |
| A2 Plough width (mm) | 2545 | 3075 |
| A3 Plough width (mm) | 2550 | 3070 |
| B Length (mm) | 1230 | 1230 |
| C Height (mm) | 1320 | 1480 |
| C1 Height (mm) | 945 | 945 |
| Weight (kg) | 1170 | 1260 |
| Shooting angle | ± 45° | ± 45° |
| Blade from steel | − | − |
| Blade from hardox | · | · |
| Blade from rubber | · | · |
| Blade from vulkolan | − | − |
| Blade angle | 60° | 60° |
| Protection system | HYDR. SEC. | HYDR. SEC. |
| Number of blade segments | 4 | 4 |
| Hydraulic flow (Lpm) | min. 20 | min. 20 |
| Hydraulic pressure (MPa) | max. 20 | max. 20 |
| Need of hydr. circuit | 2 | 2 |
| Carrier power requested (kW) | Up to 110 | Up to 110 |
Agrometall s.r.o. reserves the right to modify the technical parameters and construction of mentioned products without notice.
