Spring-loaded plough OR-T1 for tractors is intended for connection with machine equipped by 3-point hitch class 2 or with clamping plate responding to DIN 3-5.
Spring-loaded plough OR-T 1
Maximal tractor power is 70 kW. Maximum working speed is 20 km/h, maximum transport speed is 30 km/h.
Blade from hardox. The plough is equipped by depth foot to assure its stability if being parked.
Would you like to know more?
- Maximal tractor power is 70 kW
- Maximum working speed is 20 km/h
- Maximum transport speed is 30 km/h
Basic machine equipment:
- Hitch class 2
- Plough spring-load: the plough is divided to 3 parts and each of them is independently spring-loaded in case of striking the barrier.
- Hydraulic shooting within angle ± 30° using two hydraulic cylinders
It is possible to deliver wide range of accessory:
- Blade from rubber,
- Side impact protection
- Position lighting
- Hydraulic after load
- Shield against snow overflown
- Sliding and depth wheels
Technical parameters of the 2200 and 2400 versions
| Finish | FRONT | FRONT |
|---|---|---|
| Type | OR-T1 | OR-T1 |
| Commercial labelling | OR-T1 2200 | OR-T1 2400 |
| A Plough width (mm) | 2290 | 2490 |
| A1 Plough width (mm) | 1905 | 2060 |
| A2 Plough width (mm) | 2050 | 2240 |
| B Length (mm) | 1380 | 1380 |
| B1 Length (mm) | 1740 | 1850 |
| C Height (mm) | 980 | 980 |
| C1 Height (mm) | 800 | 800 |
| Weight (kg) | 620 | 645 |
| Shooting angle | ± 30° | ± 30° |
| Blade from steel | − | − |
| Blade from hardox | · | · |
| Blade from rubber | · | · |
| Blade from vulkolan | − | − |
| Blade angle | 20° | 20° |
| Protection system | SPRINGS/HYDR. SEC. | SPRINGS/HYDR. SEC. |
| Number of blade segments | 3 | 3 |
| Hydraulic flow (Lpm) | min. 20 | min. 20 |
| Hydraulic pressure (MPa) | max. 20 | max. 20 |
| Need of hydr. circuit | 1 | 1 |
| Carrier power requested (kW) | Up to 70 | Up to 75 |
Technical parameters of the 2200 and 2400 versions
| Finish | FRONT | FRONT |
|---|---|---|
| Type | OR-T1 | OR-T1 |
| Commercial labelling | OR-T1 2200 | OR-T1 2400 |
| A Plough width (mm) | 2290 | 2490 |
| A1 Plough width (mm) | 1905 | 2060 |
| A2 Plough width (mm) | 2050 | 2240 |
| B Length (mm) | 1380 | 1380 |
| B1 Length (mm) | 1740 | 1850 |
| C Height (mm) | 980 | 980 |
| C1 Height (mm) | 800 | 800 |
| Weight (kg) | 620 | 645 |
| Shooting angle | ± 30° | ± 30° |
| Blade from steel | − | − |
| Blade from hardox | · | · |
| Blade from rubber | · | · |
| Blade from vulkolan | − | − |
| Blade angle | 20° | 20° |
| Protection system | SPRINGS/HYDR. SEC. | SPRINGS/HYDR. SEC. |
| Number of blade segments | 3 | 3 |
| Hydraulic flow (Lpm) | min. 20 | min. 20 |
| Hydraulic pressure (MPa) | max. 20 | max. 20 |
| Need of hydr. circuit | 1 | 1 |
| Carrier power requested (kW) | Up to 70 | Up to 75 |
