Swept plough SR-T1 is intended for tractors and mini tractors powered within 50 - 90 PS. Its robust design allows the connection to the front 3-point hitch or to the clamping plate. The plough is intended for removing the fresh snow or slush.
Blade from hardox is in basic equipment.
Maximum working speed is 20 km/h, maximum transport speed is 40 km/h. The plough is equipped by depth foot to assure its stability if being parked.
| Finish | FRONT SWEPT | FRONT SWEPT | FRONT SWEPT |
|---|---|---|---|
| Type | SR-T1 | SR-T1 | SR-T1 |
| Commercial labelling | SR T1 1800 | SR T1 2000 | SR T1 2200 |
| A Plough width (mm) | 1830 | 2070 | 2240 |
| A1 Plough width (mm) | 2475 | 2770 | 3040 |
| A2 Plough width (mm) | 1655 | 1860 | 2055 |
| A3 Plough width (mm) | 1765 | 1975 | 2165 |
| B Length (mm) | 1120 | 1220 | 1320 |
| C Height (mm) | 885 | 895 | 925 |
| C1 Height (mm) | 730 | 730 | 730 |
| Weight (kg) | 575 | 590 | 615 |
| Shooting angle | ± 45° | ± 45° | ± 45° |
| Blade from steel | − | − | − |
| Blade from hardox | · | · | · |
| Blade from rubber | · | · | · |
| Blade from vulkolan | − | − | − |
| Blade angle | 20° | 20° | 20° |
| Protection system | HYDR. SEC. | HYDR. SEC. | HYDR. SEC. |
| Number of blade segments | 4 | 4 | 4 |
| Hydraulic flow (Lpm) | min. 20 | min. 20 | min. 20 |
| Hydraulic pressure (MPa) | max. 20 | max. 20 | max. 20 |
| Need of hydr. circuit | 2 | 2 | 2 |
| Carrier power requested (kW) | Up to 70 | Up to 70 | Up to 70 |
