- Search term must have more than 2 characters.
Roller spreader VS-N
The roller spreader mounted on tipper truck is intended for spreading the sidewalks and roads with inert material or salt. The working part of the machine is dosage roller with cast segments, material feed in the hooper is assured by agitator. The drive of dosage roller and of the agitator is made by rotary hydraulic motor.
In standard version is the dose control by pressure plate, spreading shaft for inert material, hydraulic connection for 1 circuit. The gritter is equipped by parking chassis to assure its stability if being parked.
Dosage can be adjusted by:
- change of the cylinder pressure
- change of the segment number on cylinder
- change of the cylinder speed
Would you like to know more?
It is possible to deliver wide range of accessory:
- Manual dosage control
- Digital control from the cabin
- Balance box
- Rear lighting
- Remote control from the cabin
- Protection cover
- Set for spreading by chemical material
|Commercial labelling||VS N 800||VS N 1250|
|A Gritter width (mm)||1000||1500|
|A1 Gritter width (mm)||800||1250|
|B Length (mm)||800||800|
|B1 Length (mm)||840||840|
|C Height (mm)||830||830|
|C1 Height (mm)||400||400|
|C2 Height (mm)||110||110|
|Drive||HYDRAULIC MOTOR||HYDRAULIC MOTOR|
|Tank volume (m3)||0.13||0.21|
|Gritter weight (kg)||200||350|
|Spreading mode - roller||·||·|
|Spreading mode - disc spreader||·||·|
|Spreading width - disc spreader (mm)||1-3||1-3|
|Dosage - inert material (g/m2)||30 − 260||30 − 260|
|Dosage - salt (g/m2)||10 − 40||10 − 40|
|Filling weight of gritter - inert (kg)||240||360|
|Filling weight of gritter - salt (kg)||290||430|
|Gritter performance (m²/h) by dosage of inert (g/m²)||1035||1600|
|Gritter performance (m²/h) by dosage of salt (g/m²)||1035||1600|
|Spreading length of gritter (m)||1000||1000|
Agrometall s.r.o. reserves the right to modify the technical parameters and construction of mentioned products without notice.